devcon说明（国外英文资料）.doc

devcon说明（国外英文资料） Device console help: Devcon.exe [-m: \ \ < machine >] < command > [< arg >...] -r if you specify it, restart the computer if the command is complete. < machine > is the name of the target computer. < command > is the command to execute (as shown below). The < arg >... Is one or more parameters required by the command. For help with a particular command, type: devcon.exe help < command > Classfilter allows you to modify category filters. Classes lists all the device installation categories. Disable disable devices that match the specified hardware or instance ID. The driverfiles lists the driver files for the device installation. The drivernodes lists all driver nodes for the device. Enable enables the device that matches the specified hardware or instance ID. Find finds the device that matches the specified hardware or instance ID. Findall looks for devices, including those that are not displayed. Help displays this information. Hwids lists the hardware ID of the device. Install the device manually. The listclass lists all the devices for an installation category. Reboot restart the local computer. Remove removes devices that match specific hardware or instance ids. Rescan scans to discover new hardware. Resources lists the hardware resources of the device. Restart restart the device that matches a particular hardware or instance ID. Stack lists the expected device driver stack. Status lists the running state of the device. Update manual update device. UpdateNI manually updates the device without a user prompt SetHwID adds, deletes, and changes the order of hardware ids of the root enumeration device. DevCon example command Devcon - m: \ \ test find pci \ * List all known PCI devices on the computer test. (by using the -m, you can specify a target computer. You must use "interprocess communication" (IPC) to access the computer. Devcon - r install % WINDIR % \ Inf \ Netloop.inf * MSLOOP Install a new Microsoft loop back adapter instance. This creates