吊车批示手语（国外英文资料）.docVIP

吊车指挥手语（国外英文资料） Lead it In order to ensure the safety of hoisting, prevent accidents and meet the needs of scientific management, this standard is formulated. This standard sets out the basic signals and related safety techniques used by field commanders and crane drivers. This standard applies to the following types of hoisting machinery, bridge crane (including metallurgy crane), gantry crane, crane, cable crane, tower crane, portal crane, truck crane, tyre crane, rail crane, crawler crane, floating crane, mast cranes, deck cranes, etc. This standard does not apply to mine lifting equipment and human lift equipment. The term common gesture for a noun term, referring to the general purpose of a type of crane in the hoisting of a crane. Special hand signal - a command gesture that is used independently by a crane with a special rise, amplitude, and rotating mechanism. A hook (including a sling, an electromagnetic sucker, a grab, etc.) -- a hook with an empty hook and a payload. The crane advances or backward -- forward means the crane is approaching the conductor. Back means the crane leaves the conductor. Before, after, left, right in the command language, all are based on the position of the driver. Sound symbol: - means a long sound that is greater than a second, a means a short sound sign that is less than one second. The circle means the sign of the pause Signals used by the command personnel Sign signal General gesture signal for 2.1.1 prepare (note) the arm is straight, placed on the head, the five fingers naturally outstretched, the palm of the hand remains motionless (figure 1). want the main hook single hand naturally clenched fist, above the head, lightly touched the top of the head (figure 2) to hook one hand with a fist, the forearm not moving, the other hand outstretched, the palm of the hand touching the elbow (figure 3). hoisting hook up small arms extend straight over the side, the five fingers naturally outstretched, above the shoulder, and the