汽车液压、液力与气压传动 典型汽车液压系统结构原理分析（国外英文资料）.docVIP

汽车液压、液力与气压传动 典型汽车液压系统结构原理分析（国外英文资料） For example, the auto hydraulic system is analyzed Auto brake antilock (ABS) system The composition of the ABS system The ABS system is mainly composed of ABS controller (including electronic control unit and hydraulic unit, hydraulic pump, etc.), four wheel speed sensor, ABS fault warning lamp, brake warning lamp, etc. Its hydraulic system is shown in figure 1 Figure 1. The ABS hydraulic system 1 - accumulator; 2 - the relief valve; 3 - electromagnetic valve; 4-wheel cylinder; 5 - accumulator; 6-pressure alarm switch; 7 - brake master cylinder; 8 - electric pump The advantages of the ABS system ABS has the following advantages over conventional brake systems: Improving braking efficiency. This is because the emergency braking under the same condition, the ABS system can slip rate control at around 20%, make full use of the longitudinal adhesion coefficient and larger lateral adhesion coefficient, make the ground of the maximum braking force between the wheel and ground, shorten the braking distance. (2) improving the direction stability of car braking. When the car is braking, the horizontal attachment coefficient is very small if the wheel is dead, and the car is very slippery. ABS controls the slip rate between 8% and 25%, with a large horizontal adhesion, and sufficient resistance to lateral interference. (3) improve the wear and tear of the wheel. The wheel of the car is worn and the drag of the wheel will cause the tire to wear down, the tire will wear out and the tire will wear out. The mensuration, car during emergency braking, wheel lock tire caused by the accumulative MoSunFei, has more than one set of the cost of the anti-lock braking system, shorten the service life of tires, ABS system can prevent the problem. (4) reducing the intensity of the drivers labor, reducing the drivers nervousness and improving the passengers comfort and safety. It is easy to use, reliable and convenient to maintain. The mechanism of the br