CAD常见问题汇总(国外英文资料).docVIP

CAD常见问题汇总 No CAD. Phenomenon: CAD 2006 can not be installed, the warning has terminated Auto CAD 2006 - Simplified Chinese installation please check C: \ DOCUME ~ 1ADMIN ~ 1 \ local ~ 1 \ Temp \ Auto CAD 2006 Setup.log to get the details. Positive: the error message is a problem with the M Framework! CAD2006 requires version 1.1 support to see if you have installed the Framework2.0 and Framework2.0 language packages in the add or delete program. If it is already installed, remove it and reinstall it. Download the address: /soft/38669.htm Two, CAD cant start Phenomenon: auto cad starts with the following phenomenon: Unable to locate the program input point? AddLinKsG1Continuity @acgeimpcompositecurve3d @qaexn @z is on the dynamic link library acge16.dll Positive solution: same thing with 3dmax! Copy the ac1st16.dll, acdb16.dll, acge16.dll from the C: \ Program Files \ Common Files \ Autodesk Shared directory to the directory C: \ WINDOWS \ system32! Three, 79 kinds of CAD small problem solving method ~ ~ post [CTrl + N] Its well known that CTRL + N is the new command But sometimes CTRL + N comes up with the selection panel Just go to the OP option and set it Operation: OP (option) - the system - has A boot on the right (A shows the start dialog box B does not display the start dialog) Select A to create A new command, and the reverse is invalid The solution to the Ctrl key doesnt work. Sometimes we have this problem For example, CTRL + C (copy), CTRL + V (paste) CTRL + A (full selection) and all the commands related to CTRL + A will fail You just need to go to the OP option Operation: OP (option) - user system configuration - - WINDOWS standard accelerator (check box) The WINDOWS standard accelerator key, which is associated with the CTRL key, is valid, and vice versa The solution for filling void Sometimes you cant fill it when you fill it Except for the system variables You also need to check the OP options OP -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --