昂达785G+魔笛版刷BIOS(国外英文资料).docVIP

昂达785G+魔笛版刷BIOS High up 785G + magic flute version brush BIOS to activate the full version of Windows 7 full tutorial One, preparation tools: 1) a large U disk (a starting disk for pure DOS) 2) UltraISO (used to make pure DOS starter disks) 3) golden finger V6 (used for the launch disk for pure DOS) 4) MDA785G + DDR3_20 (the BIOS for removing the master board of the magic flute) 5) SLIC_Dump_ToolKit_V2. 1F (to view the OEM and SLIC information of the refreshed BIOS) 6) super OEM import activation tools (to import certificates and serial Numbers) 2, get to work: 1) installation of UltraISO (registered name: li Ming, registration code: 509F - ba54-bba6-73c5); 2) use UltraISO to write the gold finger V6 to the hard disk image (that is, to make a startup disk), The write mode is usb-hdd; 3) copy the six files from MDA785G + DDR3_20 to the root directory of U. 4) turn on the Del key and turn the hard drive to a usb boot. 5) when you reboot, you will see the system image of the gold finger, selecting MAXDOS7.0 -- and choose to go to pure DOS 6) pure DOS is a direct input of the following three commands The OUT AFUDOS (space) MDA78520. ROM (space)/P (space)/B (space)/N (space)/C (space)/X The UPDATE 7) restart the refresh and then press the Del key into the BIOS to find the load optimized defaults and select him (OK) 8) the computer will restart the system and use SLIC_Dump_ToolKit_V2. 1F to see if your SLIC is 2.1 The OEM information is associative 9) run the Win7_OEM certificate serial number import tool in the super OEM activation tool. Exe selects lenovos import OK (if to step the import failed, that means you go to Microsoft center authentication before your system or your computer inside have the validation controls to Microsoft, such a situation you reshipment system, anyway here, all of you to activate the genuine, you must also know how to install Windows 7. After reshipment system directly import certificates and serial number is OK) Must be in pure DOS environme