制氧的工艺流程及各个部分的感化（国外英文资料）.docVIP

制氧的工艺流程及各个部分的作用（国外英文资料） The process of oxygen production and the function of various parts General process: thus is mainly divided into air filtration systems, air precooling system, air purification system, pressurization turbine expansion system, fractionator system, other. In other things, nitrogen compressors, oxygen compressors, in a word, theyre giving oxygen and nitrogen to the user. The user of our nine sheep is the steelmaking iron. But some information is not so mean oxygen into the air compression system, air cooling system, water cooling system, the molecular sieve purification system, turbo expander system, rectifying column system, nitrogen compressor pressurized gasification system, oxygen compressor, gas station system. Actually press the first one, they are all the same!! A distillation column is a method of rectification that separates each group. Thus the equipment of high purity component. Air distillation is the use of the various components have different volatile, namely in the vapor pressure of each component is different under the same temperature, liquid air to many parts of evaporation and condensation, so as to achieve the purpose of the separation of the components. When in condensation temperature of oxygen and nitrogen mixture through the temperature lower than it of oxygen and nitrogen mixture liquid, gas phase liquid phase occurs between hot, part of the condensed liquid in the plasma exchange of gases and release of latent heat of condensation liquid part due to absorb heat evaporation. Because of the difference in boiling point, the sequence of vaporization of oxygen argon is: n argon oxygen and the reverse order is just the opposite of the oxygen argon nitrogen. In this system, the change process was conducted on the plate, when the gas from bottom to top in put on the plate by, increasing the concentration of low boiling point components, as long as the plate enough, on top of the tower can obtain high purity of low boiling