基于相关性分析的载荷_强度干涉模型_高鹏.pdfVIP

第31卷第12期 东 北 大 学 学 报 (自 然 科 学 版 ) Vol.31,No.12 2010 年 12 月 Journal of Northeastern University (Natural Science) ec.　2 0 10 - 高　鹏, 谢里阳 ( , 　110004) 　　　:-, , , - · , · -, , · , · · 　　:;;;; :TH 122;TB 114.3　　　:A 　　　:1005-3026(2010)12-1753-04 Load-Strength Interference Model Based on Correlation Analysis GA O Peng, XIE Li-yang (School of Mechanical Engineering Automation, Northeastern University, Shenyang 110004, China. Correspondent:GAO Peng, E-mail:gaogaopeng @163.com) Abstract:The conventional load-strength interference model is suitable for the static reliability analysis of a component, where the load is independent of strength.With the strength degradation taken into account, the residual strength of a component is the function of the magnitude and frequency of loading.The conventional load-strength interference model is therefore unable to analyze the reliability of a component or system if the strength is in degradation.By defining the equivalent coefficient of the loading frequency and referential load, a load-strength interference model considering the correlation between the load and the strength is developed, which can be used to evaluate the reliability of a component or system in strength degradation under random load.In addition, the common cause failure due to sharing the same random load affects greatly the reliability analysis of a system.A reliability modelis developed for the system considering the common cause failure is derived.A numericalexample is given to show the rationality and effectivity of the reliability model.