华为与思科命令区别精选.docx

《2010思科路由协议挑战100问》第二期红盟过客类型：网络认证大小：1.2M语言：中文评分：8.0标签：立即下载思科、华为、H3C这些网络设备的命令还是挺多的，不过我们一般用的路由交换机设备都是最简单的了，先学基本命令，再学其他功能命令。路由命令是最基本的命令了。思科、华为、H3C常用命令对比大全CISCOH3CHUAWEI描述noundoundo取消、关闭当前设置showdisplaydisplay显示查看exitquitquit退回上级hostnamesysnamesysname设置主机名en, config terminalsystem-viewsystem-view进入全局模式deletedeletedelete删除文件reloadrebootreboot重启writesavesave保存当前配置usernamelocal-userlocal-user创建用户shutdownshutdownshutdown禁止、关闭端口show versiondisplay versiondisplay version显示当前系统版本show startup-configdisplay saved-configurationdisplay saved-configuration查看已保存过的配置show running-configdisplay current-configurationdisplay current-configuration显示当前配置no debug allctrl+dctrl+d取消所有debug命令erase startup-configreset saved-configurationreset saved-configuration删除配置endreturnreturn退到用户视图exitlogoutlogout登出logginginfo-centerinfo-center指定信息中心配置信息lineuser-interfaceuser-interface进入线路配置（用户接口）模式start-configsaved-configurationsaved-configuration启动配置running-configcurrent-configurationcurrent-configuration当前配置hostip hostip hosthost名字和ip地址对应交换部分enable passwordset authentication password simpleset authentication password simple配置明文密码interface type/numberinterface type/numberinterface type/number进入接口interface vlan 1interface vlan 1interface vlan 1进入vlan配置vlan管理地址interface ranginterface ethID to IDinterface ethID to ID定议多个端口的组enablesecretsuper passwordsuper password设置特权口令duplex (half|full|auto)duplex (half|full|auto)duplex (half|full|auto)配置接口状态speed (10/100/1000)speed (10/100/1000)speed (10/100/1000)配置端口速率switchport mode trunkport link-type trunkport link-type trunk配置trunkvlan ID /no vlan IDvlan batch ID /undo vlan batch IDvlan batch ID /undo vlan batch ID添加、删除vlanswitchport access vlanport default vlan IDport accesvlan ID将端口接入vlanshow interfacedisplay interfacedisplay interface查看接口show vlan IDdisplay vlan IDdisplay vlan ID查看vlanencapsulationlink-protocollink-protocol封装协议channel-group 1 mode onport link-aggregation group 1port link-aggregation group 1链路聚合ip routing默认开启默认开启开启三层交换的路由功能no switchport不支持不支持开启接口三层功能