塔式起重机计算书要求(国外英文资料).docVIP

塔式起重机计算书要求(国外英文资料) The tower crane calculation of the content requirements General rules Design basis and product standard To indicate the calculation basis, design method and means of the use, the purpose of which is attained; Product standards. Crane main parameters 1.2.1 lifting characteristics 1.2.2 technical performance Major technical data Includes: the work level of crane, the level of work of the organization, the level of work of the structure. 1.2.4 load, load coefficient and load combination The structure is calculated The calculation of this part is to ensure the strength, stiffness and stability of tower crane structure. The current calculation is usually based on the analysis of the strength and stiffness of the component by the finite element analysis technique, and the core of the component stability is carried out. Usually include: The calculation of the main force structure is determined Calculated to determine the critical, need to understand the crane work throughout the life cycle, according to its working condition and load condition, the motion state and components such as the combination of sectional characteristic change state, stress analysis, according to the working condition of crane load shall be defined by the combination of calculation. 2.1.1 computing state (1) working condition 1) working without wind; 2) the working state of the wind; The wind blows from the balance arm towards the arm. The wind is vertically balanced and the arms are blown. (2) not working 1) uninstall the status of work; 2) the state of the storm; 3) installation of disassembly; 4) transportation status; 5) test status. 2.1.2 load state Load state is the position, size and direction of the load. Determine the structural calculation of load state, should be based on specific situation, analysis the load in the state of different calculation, different role position and direction of structure strength and stability, the influence of the structure under the most dan