基于 IEEE1149.7标准的 TAP.7适配器研究.pdfVIP

计算机测量与控制.2012.20(7) • 1934 • Computer Measurement Control |算法、设计与应用| 文章编号: 1671 - 4598( 2012)07 -1934 - 04 中图分类号:TN401 文献标识码:A 基于 IEEEl149.7 标准的 TAP.7 适配器研究 黄 S斤，总俄，瓢，营龙 (桂林电子科技大学电子工程与自动化学院，广西桂林 541004) 摘要:随着电子技术的发展，芯片功能日趋复杂，在芯片中集成多个 TAPC 来实现芯片功能多样化成为发展趋势;为避免重复开发 所带来的额外开销，利用现有的 IP 来创造复杂系统芯片成为研究重点，因此TAP.1 接口与 TAP.7 接口运配问题成为芯片设计者所面临 的新问题g 针对该问题，文章提出了一种基于 IEEE 1149.7 标准的适配接口 TAP.7 适配器;结合 TAP.7 接口结构和新增功能，对 TAP.7 适配器的设计原理和设计方案进行了详细的介绍;最后对该适配器的 TAP.7 命令功能和星型扫描技术进行了仿真验证，通过验 证结果分析表明， TAP.7 适配器实现了 TAP.7 功能，具备了接口适配的作用，达到了预期的设计目标。 关键词: IEEE 1149. 7 标准; TAP.7 接口; TAP.7 适配器;星型扫描 Research of TAP. 7 Adapter Based on IEEE 1149. ì Boundary Scan Standard Huang Xin , Cai lun , Yan Xuelong CSchool of Electronic Engineering , Guilin University of Electronic Technology , Guilin 541004 , China) Abstract , With the development of electronic technology. functions of chips are becoming more complex. the diversification functions of chips is realized by integrating multiple T APCs. this becomes development trend. To avoid the extra cost brought about by repeating devel opment. the use of the existing IP to create complex system chip becomes key research. so the adapter problem between TAP.1 interface and T AP. 7 interface becomes the new problem chip designer facing. Aiming at this issue. in this paper adaptive interface T AP. 7 adapter based on the IEEE 1149. 7 standard is put forward. Combined with TA~ 7 interface structure and function characteristics. the TAP. 7 adapter de sign principle and proposal is introducted in detail. Finally the T AP. 7 commands function and star scanning technique is simulated. through the test