gage RR数据若何剖析(国外英语资料).doc

gage RR数据如何分析 Use Minitab for Gage RR analysis The 2010-08-19 [ Use Minitab for Gage RR analysis 1. Prepare data Before you do the analysis, prepare the worksheet. Data is the data in the table must be similar to the form below, there should be at least 3 columns, column is the serial number of parts, a column is the operators number or name, a column is the parts corresponding specific measurements. There are two ways that Minitab can generate a worksheet like the one above, 1) create the Gage RR research worksheet, which generates data collection worksheets based on specific Gage RR research 2) import existing data - such as storing the old data in Excel spreadsheets Create the Gage RR research worksheet This feature is similar to a new worksheet. Through the menu to select the Stat Quality Tools Gage Study Create Gage RR Study Worksheet (statistical Tools Quality measuring tool Create Gage RR Study schedule) Number of parts Number of operators will enter the Number of operators The Number of replicates inputs the Number of times each part is repeated In the box under the Part Name and Operator Name, specify the Part number and Operator number or Name. Here is the Chinese version of the operating interface Generate a table similar to the figure below They then measured the different numbered parts in the order of the RunOrder, and saved the results to C5. Import existing data If you used the Excel spreadsheet program to do Gage RR analysis, you need to import the data into Minitab first. For example, the table below You can see that there are 10 parts, three surveyors, each measuring three times. Because the data in Minitab is organized in columns, we have to do the data transformation first. Start by copying and pasting the nine columns of data into the Minitab worksheet, similar to the image below The data is then stacked up in the column by the Minitab stack. You can do this by stacking the Data, selecting the menu Data Stack Columns ( Stack, Columns)