solaris装置教程,合营图解(国外英语资料).doc

solaris安装教程,配合图解 Sun solariss installation tips: Author: huangpu Download the address: /technetwork/server-storage/solaris10/downloads/index.html When you download it, you can also buy a plate (not expensive). I installed it on an X86 My configuration: Memory: 1.5 G Hard disk: 100 g Insert the CD and turn it on The figure below is to decide which type of Console to use, and basically the first one is correct. The other two Serial Console you can use the arrow keys to select the type of Console you need. Basically, these two Serial Console is used to give some not use a VGA monitor to display the headless rack - mounted system use, therefore, this type of system is the need to plug in Serial Console or Serial terminal operation. In 60 seconds, the system will Boot Solaris OS automatically if you dont press the ENTER key to determine your choice The following is the following information This is loading There are six installation options. You can use the arrow keys to select the method or sample timer function you need to reach 30 seconds. After more than 30 seconds, there will be automatic installation. Here we choose 1. If not, you can press the ESC key to change the Settings of the hardware. The next step is the following process Select the last us-english and press F2 to continue the installation Press the enter button and proceed to the installation interface Press enter to enter the window Here we choose 0 English Here is the directory to set up directly NEXT And then we have the following situation, if we go to a single machine and choose Non - and we choose to go to the networked, and then next The next window will appear, which is to see if you select no using dynamic IP, and next The next window is to set the hostname, and Im going to set the name of the host directly to the pinyin of my name, and you can set it at will The next step is to set the IP address, set the IP address you are going to use, and then next Next, enter the subnet mask, then next The w