数字电子技术第10章自测练习及习题解答(国外英语资料).doc

数字电子技术第10章自测练习及习题解答 Self-test practice There are usually two ways to get a rectangular pulse: one is (); The other is (). The trigger has () a stable state, respectively () and (). A single stable trigger has () a stable state. A multivibrator has () a stable state. To generate the circuit directly from the pulse; The process of shaping the existing signals. 2, 1. 2. 3. 1 4. 0 Self-test practice Multivibrator () (need, no need) plus the effect of trigger pulse. 2. Using transmission delay time of gate, will () (odd, even, arbitrary) gate head-tail, make up more than a simple harmonic oscillator. The conversion between two transient state of a multivibrator is achieved by (). The oscillation frequency of the quartz crystal oscillator is determined by (R, C, the resonant frequency of the crystal itself). The two advantages of quartz crystal oscillator are () and (). 1. Dont need 2. An odd number The charge and discharge of R and C. The resonant frequency of the crystal itself. The frequency is accurate and the stability is good. Self-test practice A single stable trigger has () a stable state and () a transient state. A single steady-state trigger (need, no need) plus a trigger pulse. The transient duration of a single stable trigger is dependent on (), not the width of the external trigger signal. In order for a single stable trigger circuit to work properly, the width requirement for the extra trigger pulse is (). 5.74 LS121 is () (repeatable triggered, not repeatable triggered) monostable trigger, 74 ls123 is () (repeatable triggered, not repeatable triggered) monostable trigger. 6. Using the 74 ls121 constitute a monostable trigger circuit, an external capacitor Cext connect between and () () the feet, external resistance Rext pick between and () () the feet. Its output pulse is (). 7. Using the 74 ls121 constitute a monostable trigger circuit, if you want plus a trigger for rising along the trigger, then the trigger pulse should be input to the () (3, 4, 5). 8. 7