PS 刀片系统AIX服务请求代码.doc

101-711 through FFC-725 SRNs AIX? might generate service request numbers (SRNs) from 101-711 to FFC-725. Replace any parts in the order that the codes are listed in?Table 1. Note:?An?x?in the following SRNs represents a digit or character that might have any value. Table 1. 101-711 through FFC-725 SRNs SRN FFC Description and Action 101-711 to 101-726 711 to 726 The system hung while trying to configure an unknown resource. Run the stand-alone diagnostics problem determination procedure. If the problem remains, refer to?Failing function codes 151 through 2E33?to find the FFC that matches the last three digits of the SRN. Suspect the device adapter or device itself. 101-888 210 227 The system does not IPL. Go to?Performing the checkout procedure?or undetermined problem procedure. 101-2020 ? The system hung while trying to configure the InfiniBand Communication Manager. This problem may be attributed to software. Report this problem to the AIX Support Center. 101-2021 ? The system hung while trying to configure the InfiniBand TCP/IP Interface. This problem may be attributed to software. Report this problem to the AIX Support Center. 101-xxxx xxxx The system hung while configuring a resource. The last three or four digits after the dash (-) identify the failing function code for the resource being configured. Go to undetermined problem procedure. 103-151 151 The time-of-day battery failed. Go to?Removing the battery?to start the battery replacement procedure. Go to?Installing the battery?to complete the procedure. 109-200 ? The system crashed while you running it. Go to?Performing the checkout procedure. If the 8-digit error and location codes were NOT reported, run AIX diagnostics in problem determination procedure and record and report the 8-digit error and location codes for this SRN. 110-101 ? The diagnostics did not detect an installed resource. If this SRN appeared when running concurrent diagnostics, then run concurrent diagnostics using the diag -a com