电脑店u盘启动盘简要使用教程doc.doc

简要使用教程： ? 1、执行安装程序 （点击进入电脑店U盘装系统-安装和制作图文教程 ） ? ? ? 2、点击?按钮，程序会提示是否继续，确认所选U盘无重要数据后开始制作： ? ? ? ? ? 3、根据需要，可点击?按钮，可修改U盘启动背景。（点击进入电脑店U盘装系统-个性化启动背景教程） ? ? 4、根据需要，可添加自己的PE iso或IMG文件。（点击进入电脑店U盘装系统-运行自定义ISO和IMG?IMA教程 ） ? ? ? 5、设置U盘启动，可按F2加速引导进入pe。（点击进入电脑店U盘装系统-设置U盘启动教程 ） ? ? ? 6、如果已设置自动安装系统，在进入PE到下图时可以实现自动安装。（点击进入电脑店U盘装系统-自动系统安装详解 ） ? ? ? ? 7、另可以支持安装原版WIN7，可以节省5分钟以上时间：（点击进入电脑店U盘装系统-安装版Win7安装教程） ? ? ? 9、当然，也支持安装原版XP。（点击进入电脑店U盘装系统-安装版XP安装教程?） ? ? ?常用功能一览：（点击进入电脑店U盘装系统-常用功能和工具介绍 ） ? ? ? ? ? ? ? ? ? ? ? ? ??? 软件官方网址： ??? 软件官方联系邮箱：diannaodian@? the same direction of rotation 90 ° or 180 ° for; after each disc rotor when measuring position alignment of the two half coupling constant, should also be in terms of accuracy and consistency. Surface deviation measurement, must in every 180 degrees corresponding to the two radii are equal to each other in order to eliminate errors caused by movement of the rotor. Only a support bearing of the rotor, WA couplings, such as the use of temporary leave the Center, should pay attention to keep the rotor in the measuring process in the center of the bearing oil retaining the nest does not change. Steam oil block, there should be sufficient clearance between the rotor and, in rotors make sure rotor is not on the block or seal oil. At the time of measurement, connections are not allowed between two rotors, each in a free State. Not allowed in case of assembled sleeve, Center work on the toothed coupling. Coupling tool should have adequate stiffness, installation must be secure and reliable. Coupling Center using a dial indicator, the table should be put in prison and avoid touching, to ensure correct measurement. Coupling disc after a week to return to the original position, circumference of dial gauge reading should be able to go back to the original value. When measuring the clearance of end, into the feeler of the gap should not exceed four at a time, when the gap is too large, you can use the gasket with the feeler gauge measurement of