15春西交《钢结构基本原理》在线作业满分答案(国外英语资料).doc

15春西交《钢结构基本原理》在线作业满分答案(国外英语资料) Austrian Peng 15 spring West submitted to the basic principles of steel work online Total score: 100 test time: - Radio examination Judgment question Radio examination questions (30 questions, 60 points) 1. the following statement about stress concentration is correct. A. stress concentration reduces the yield strength of steel B. stress concentration produces the same number stress field, which limits the plastic deformation C. stress concentration produces an abnormal stress field, which makes the steel brittle D. stress concentration can improve the fatigue strength of component Full marks: 2 2. pressure type high strength bolt connection is higher than friction type high strength bolt A. has low bearing capacity and large deformation B. has high bearing capacity and large deformation C. has low bearing capacity and little deformation D. has high bearing capacity and little deformation Full marks: 2 3. for the structure directly under the dynamic load, it should be adopted. A. welding connection; B. common bolt connection; C. friction type high strength bolt connection; D. pressure type high strength bolt connection Full marks: 2 4. one of the major factors for welding residual stress is (). A. the plasticity of the steel is too low B. steel has too large modulus of elasticity When C. welding, the heat distribution is uneven D. the thickness of the weld is too small Full marks: 2 5. for the carbon structural steel members subjected to static load and no serious stress concentration at normal temperature, the welding residual stress has no obvious influence on the following Stiffness of A. members Ultimate strength of B. members Stability of C. components Fatigue strength of D. component Full marks: 2 6. the factors that have nothing to do with the stability of the axial compression bar are. A. lever end restraint B. residual stress Initial eccentricity of C. component The content of useful metal elements in D. steel Full marks: 2 7.