2012版最新ALPHA 变频器在自动扶梯上的应用(国外英语资料).docVIP

2012版最新ALPHA 变频器在自动扶梯上的应用(国外英语资料) I. overview: Escalators are malls, stations, and a manned lifting equipment commonly used in airports. A shopping mall has two automatic upper and lower escalator, using 11kW (quadrupole) AC motor transmission, after the reducer deceleration, drag the escalator operation. Two escalators, one as uplink, the other as a downlink, running for some time after the artificial exchange, that is, the uplink exchange for downlink, downlink switching for uplink operation. In the process of operation, customer flow is different in different time, sometimes take the escalator may not have a person, because the customer arrival is random, it is impossible in no one aboard the escalator will stop running, not only for the speed control of the escalator to the rated speed idling, such operation is not the economy, waste energy, and chain, belt wear, short maintenance period, brought a lot of trouble to the normal use. Therefore, the escalator frequency conversion speed transformation, in the absence of passengers to speed down the operation, some people ride and then smoothly accelerated to the rated speed operation. In this way, the abrasion of the chain and the belt can be reduced; the output power of the motor is greatly reduced after the speed is lowered, and a certain energy saving effect is brought. The longer the unmanned ride, the more effective the energy saving. Two, transformation plan Motor with two ALPHA3300 general inverter control escalators, passenger operation inverter is set as an external terminal control, speed control set for multi section, which set the normal operation frequency (50Hz) deceleration operating frequency (15Hz)?. When running (crawling), the running frequency is low, about 25Hz. 1 sensors The sensor is an infrared sensor. It is installed at the entrance of the escalator at the height of 2.5m above the ground, and focuses the camera on the direction of the guest, and slightly downward. Since the operation of the