APDL-两向正交正放网架(国外英语资料).doc

APDL-两向正交正放网架(国外英语资料) /prep7! Get into the pre process *afun, DEG, the angle unit is the degree Multipro,start, 5. Generate a multiline parameter input dialog box *CSET, 1,3, LX,Grid, Side, lx= (m), 1, input mesh, long edge, long LX *CSET, 4,6, ly,Grid, Side, ly= (m), 1.2, input mesh, short edge, long ly *CSET, 7,9, N,Grid number of the long side n the top surface=, the 7 quarter! Input plane grid length direction of node number *CSET, 10,12, m,Grid number of the short side n the top surface=, 7! First plane grid short side direction input node number *CSET, 13,15, Z,distance between the top and bottom surface z= (m) -1 bottom plane grid distance input! *CSET, 61,62,Please, input, geometry, parameters, of, the, grid.. The top of the dialog box displays the content as MULTIPRO,END *DO, I, 1, m, the plane node coordinates calculation! And the definition of node *DO, J, n* (i-1), +1, n*i N, J, (j-1-n* (i-1)), *1x, 1y* (i-1), 0, generate the line 1~m node along the long side *enddo *enddo *DO, I, 2, M-1, calculate the bottom plane node coordinates! And the definition of node *DO, J, n*m+1+ (I-2) * (n-2), (n-2) * (i-1) +n*m N, J, (j-n*m- (I-2) * (n-2)), *1x, 1y* (i-1), Z, generate the line 2~m-1 node along the long side *enddo *enddo Define unit type and real constant RTNUM=3 - the number of constants, types, and numbers that can be entered *DIM, AREAIN, ARRAY, RTNUM - define the bar cross sectional area array *DIM, IZZIN, ARRAY, RTNUM... Define the area of inertia moment array *DIM, IYYIN, ARRAY, RTNUM... Define the area of inertia moment array *DIM, TKZIN, ARRAY, RTNUM define the section along the Z axis height array *DIM, TKYIN, ARRAY, RTNUM define the section along the Y axis height array *DIM, THETAIN, ARRAY, RTNUM - define the angle array between the axis of the member and the X axis *DIM, ISTRNIN, ARRAY, RTNUM define the initial strain array of the member *DIM, IXXIN, ARRAY, RTNUM! Define the rod torque array *DIM, SHEARZIN, ARRAY, RTNUM - define a constant array