AWA5680多功能声级计使用方法(国外英语资料).doc

AWA5680多功能声级计使用方法(国外英语资料) Parameter setting According to the measurement requirements set the measurement time and frequency weight, time weight and other related system parameters the user first use of equipment, system parameters set, the instrument will set the results recorded in the power off, automatically transferred to the next and then when. Press the instruments on / reset button, move the cursor to the settings menu, press the OK key to enter the parameter settings. Press the settings button at the measuring interface, and you can also enter the parameter settings directly. Note: you cannot enter parameter settings when starting measurements. 1.1 calendar clock adjustment After entering the parameter setting, move the cursor to the calendar clock, press the OK key, and enter the calendar clock adjustment interface, as shown below: Key parameters can change the numerical cursor, the cursor keys to move the cursor, press the OK button to change after you can change the instrument internal calendar clock, if you do not want to change the original clock, you can press the eject button; the keys can be used GPS school. The GPS clock in the right border does not display when the user does not install the GPS module or closes the GPS location. The instrument is powered off when the instrument clock relies on internal battery backup power supply, battery backup instrument clock can support more than 3 months of continuous work (such as the installation of the GPS module, then work continuously shortened to 2 months). The backup battery is a rechargeable battery. When the instrument is switched on, it can be charged. When the voltage of the backup battery is lower than 3V, the clock of the instrument will be lost and reset. It is recommended that the user boot the instrument more than 8 hours a month to recharge the internal backup battery. 1.2 measurement time setting Into the settings interface, you can move the cursor to the measurement time of H, m, S. With th