Bypass功效介绍及剖析(国外英语资料).docVIP

Bypass功能介绍及分析(国外英语资料) Bypass function introduction and analysis, what is the Bypass network security equipment is generally used in between two or more networks, such as between intranet and Internet, the application of network security devices within the network packets through his will to carry on the analysis, to determine whether the threat exists, after processing according to the routing rules the packet is forwarded. If the network security equipment malfunction, such as power outages or after the crash, all the segments connected by this equipment has lost contact with each other, this time if the requirements of each network also need each other in a connected state, so we must use Bypass. Bypas, as the name suggests, is a bypass function, that is, through a specific trigger state (power failure or crash), so that the two networks are no longer through the network security device system, and direct physical conduction. So after the Bypass, after the failure of network security equipment, which can make the connection in this device on the network are mutually communicated, of course, this time the network equipment is no longer on the network packet processing. The following illustration illustrates how Bypass works. On the left is the device in normal working condition, the two network packets are processed by the application software, and then spread. On the right is the device Bypass turn-on state, and the devices application no longer handles network packets. The equipment is in normal working condition and the light is on when it is working. Device fault status, Bypass turn-on Note: the status of the network card indicator can show the status of Bypass and the working status of the normal network card. Under the condition of Bypass, the indicator light of the network card is not on, and the network card is positive Two, Bypass classification, that is, the way of application: Bypass is generally divided according to the control mode or the trigger mode