GRC轻质隔墙板安装技术(国外英语资料).doc

GRC轻质隔墙板安装技术(国外英语资料) Installation technology of GRC light partition board GRC is a glass fiber reinforced cement is made of alkali resistant glass fiber materials with low alkalinity high strength cement mortar as cementing material, lightweight inorganic composite materials as aggregate, implementation of the national standard of JC666; GRC component with a thin, high flexibility, good performance, anti impact low alkalinity, free expansion rate of small crack reliable performance, stable quality, moisture-proof, insulation, sound insulation, fire, sawing, drilling, nailed, planed, chisel, wall formation of simple construction, avoid wet work, improve the construction environment, save land resources, reduce the load weight in the construction of buildings, clay brick is (1 / 6 - 1 / 8), and weight reduction based on reinforced concrete beam, reduce the total cost of the project, expand the use area. It is the best material for building non bearing parts instead of clay bricks. It has been widely used in recent years. It is a new type of lightweight wall material recommended by the Ministry of construction materials and the Ministry of construction. Because the CRC lightweight partition board is installed in the building of non load bearing parts, the parts are required for installation of large span maximum deformation, the weakest anti load capacity, the lightweight partition board and groove is assembled and the smooth surface of the particularity, it is easy to cause cracks in plates, plates and doors and windows link link the concentrated load will cause, vibration light wallboard deformation, cracking and hollowing of the installation of the GRC slat assembling method and the pipeline embedment, opening and splitting groove, instruments, puts forward new problems plastering quality problems and puts forward some prevention measures. Strictly according to the following process: organization construction, positioning line, cleaning up the floor with steel plat