G网C网的辐射(国外英语资料).doc

G网C网的辐射(国外英语资料) In the end GSM mobile phone and CDMA mobile phone radiation power man or how much difference, for the objective comparison results of the actual, by an international famous CDMA technology company and the authority of a well-known domestic GSM network optimization company engineering and technical personnel in early December 2001 along the two ring road of Beijing city line CDMA and GSM mobile phone transmission power the present network test. The test results show that in the two loop on the CDMA mobile phone average transmitting power is 2.4dBm (1.72 MW), GSM mobile phone average transmitting power is 28.9dBm (773 MW), considering the launch GSM mobile phone for only 1/8 weeks, equivalent to GSM mobile phone at the time of the average transmit power can be reduced to 96.63mW (19.85dBm). Thus, the average transmit power of CDMA mobile phones is equivalent to 1.78% of the average equivalent transmit power of GSM mobile phones in time. This paper is divided into four parts, the first part compares the requirements from CDMA and GSM system on the CDMA and GSM mobile phone transmit power; the second part introduces the process and results of road test; the third part discusses the current widely used by the international mobile phone radiation standard (SAR) and the relationship between the launch of mobile phone power; the fourth part is the conclusion. First, CDMA and GSM system to transmit power requirements of mobile phones Lets first take a look at the requirements of CDMA and GSM related technical specifications on the transmit power of mobile phones, [2, 3]. GSM mobile phone 900MHz band maximum transmit power is currently used for 2W (33dBm), maximum transmit power 1800MHz frequency of 1W (30dBm), at the same time specification for GSM900 and 1800 bands, mobile phone communication in the process of minimum transmit power is not lower than 5dBm and 0dBm respectively. CDMA IS-95A specification for maximum transmit power requirements for mobile pho