多层与高层建筑结构概念设计_风在跑(国外英语资料).doc

多层与高层建筑结构概念设计_风在跑(国外英语资料) Research and practice of widening and lifting technology of double curved arch bridge Chen Jie King Group Jiangxi Communications Bridge Inspection reinforcement Co., Ltd., Nanchang 330038, China Abstract: This paper takes the Magang bridge as an example, and expounds the comprehensive reinforcement of the double curved arch bridge Use, such as carbon fiber cloth, anchor spray concrete, change the arch on the form of construction, outsourcing, concrete and so on. Key words: bridge engineering; double curved arch bridge; widening; carrying; comprehensive application 0 Preface Double arch bridge is a bridge in twentieth Century 60s the first light arcuated Mid Chinas Jiangsu province Wuxi County Bridge workers. Due to the erection of arch, wood saving, fast construction speed and the cost of steel less, this bridge appears rapidly across the country to get a large number of application. But because of the design load is low, and the hyperbolic arch arch, arch by wave, arch board and horizontal contact and combined according to a certain order, and the combination of rib and wave and plate surface is too small, the stress of the section of complex and poor integrity, resulting in 60 ~ 80s the construction of a large number of double curved arch bridge in the operation of the years after the emergence of different diseases are more serious security risks, can not meet the growing traffic demand. The arch bridge has a large potential overload, most of them after reinforcement and repair can continue to use, even after widening and set out to meet the design standards of higher. In this paper, a case study of how to make effective use of the double curved arch bridge is carried out with the industry as an example. Go Magang bridge (see Figure 1) is located at K2+250 (the new pile Xiuwu Highway No.), built in 1974. The upper structure consists of 2 span 40m equal section catenary, Vierendeel reinforced concrete double curved arch, and a semicircl