废纸的碎解与疏解(国外英语资料).docVIP

废纸的碎解与疏解(国外英语资料) The dissociation of waste paper fiber is mainly based on the hydrolysis of hydraulic pulp mill, and also useful for cooking and cracking. Hydraulic breaker The hydraulic pulping machine was invented in 1938 by B.C Black Clausen (Black Clawson). In 1959, B.C developed a Vokes Rotor that could efficiently break waste paper, but with high power consumption. In 1973, B.C company has launched Power SaverVokes Rotor, which is still popular type P.S Vauxhall rotor around the world, the rotor can produce strong backwash effects, thus breaking capacity and low power consumption, all countries now have aquapulper their production, but its rotor structure is mostly in the Vauxhall P.S the rotor is improved into a prototype. Figure 9 - 2 is the P.S rotor. (1) the function of hydraulic breaker; In the waste paper pulping, the hydraulic breaker mainly functions as the dissociation fiber, and has the preliminary separation, removes the significant impurity the function. In the process of breaking up, the original strength of the fiber should be kept as much as possible, and the sundries attached to the fiber should be separated, but the debris should not be broken excessively to remove the later process. Deinking is also started from the hydraulic pulping machine. In the hydraulic breaker, the deinking agent is used to cure the ink. The ink is removed from the surface of the fiber fully and dispersedly, which is another function of the hydraulic breaker. (two) the characteristics of various types of hydraulic pulping machines; A hydraulic breaker has vertical and horizontal, continuous and intermittent, high and low concentrations. Their structural diagrams are shown in Figures 9 - 3 to 9 - 7. The function of the hydraulic pulp breaker is to break the waste paper by the action of the flow generated by the high speed rotating rotor (circumferential speed 900 ~ 1100m / min). Behind the rotor (horizontal) or below (vertical) is the sieve plate, in the sieve plate The