卧龙牌电动车自行车使用说明书(国外英文资料).docVIP

卧龙牌电动车自行车使用说明书(国外英文资料) Safety requirements for the vehicle The main components of electric bicycle operation 1, power switch, the power switch is the main power supply circuit switch, when placed in the open position switch on the power supply system, monitors the power indicator, placed in the off position, the system power supply cut off. Note: when there is an abnormal phenomenon in the vehicle, it is important to turn off the power switch in time to prevent the accident from expanding further. 2, the emergency stop switch in some type of electric bicycle beside the speed control lever is equipped with an emergency stop switch, in the process of riding in an emergency, timely according to the urgent stop switch and brake. The speed adjustment is transferred to the right side of the car, and the speed of the electric car can be adjusted smoothly by rotation. 4, brake handle, brake handle and ordinary bicycles, operation of electric bicycle brake handle with brake power device, when the brake fashion in the micro switch action inside the brake handle, the output signal to the controller, the controller to control, cut off the motor power, the motor stop working. Display unit Electric bicycle has the display device, such as electricity, power, speed, when the power indicator lights turning on the power supply, voltmeter to rise to the current voltage (display data are for reference only). Second, check 1, use double support to set up electric bicycle to turn on the power switch, check the electrical performance, adjust the hand, the power failure brake to be normal. The battery box lock is locked, and the display unit shows whether it is normal. Check the tires gas enough, otherwise it will affect the mileage or damage to the tyre. Check to see if the brake system is abnormal, turn on the light, and the device is normal. Three, operation and maintenance after checking normal open the electric bicycle double support, sitting on the saddle, the right hand gently rotat