印刷机弊病的诊断(国外英文资料).docVIP

印刷机故障的诊断(国外英文资料) The diagnosis of the printer malfunction Our company is one is engaged in the printing machine maintenance for many years, master said: I only want to listen to the voice of the machine, you know this machine if you have any questions, there is a problem, where the problem is. In fact, this is not a difficult task. So how do you do that in the printing press? Listen to the sound and remember the normal sound characteristics Chorus sounds in the process of normal production, the main motor, gas path, diao teeth, paper chains, and the wall inside the moving parts of ink roller, oscillating components, and even oil, these areas will be sound. In such a complex in the voice, to tell what part, from the beginning there must be a certain difficulty, but can slowly familiar in daily operation. Step 1: listen to the local or single parts For example, click run, the main motor running sound, after a certain delay, drag the host running, at that moment the sound is more, can go to listen to the corresponding parts. For example: the ear is close to the wall panel and hears the sound of the moving parts coming in the opposite direction. Turn on the ink button, and you hear the wobble of the wobble parts. The low sound of a roll of a roll or a roll of ink on a roll of ink. Near the mouth of the paper, you can hear the sound of the handing of the paper and the opening and closing of the teeth. To open the paper button, you can hear the sound of flying. Turn on the air pump and you can hear the air. Step 2: listen This step training based on the basis of mechanical parts and the motion law of familiar, offset printing machine parts movement have strict time relationship, so for the parts according to the voice of the movement rhythm to the phone. During daily work, if the machine running normally, you can listened, grab a relatively easy to difference between sounds, and then according to the movement of different parts of time relationship, to listen to the voic