数控铣床铣削参数-[转]数控铣床切削用量的选择(国外英文资料).docVIP

数控铣床铣削参数-[转]数控铣床切削用量的选择(国外英文资料) Selection of numerical control planer grinding parameter on the digital control machine tool processing parts, grinding dosage is codified in the pace of advance, in the fine processing environment, human will not be change. It is only in the process of testing or the emergence of an abnormal environment that the adjustment of the grinding volume is adjusted by the speed adjustment knob or the electric handwheel. The grinding dosage should be the best and reasonable amount of grinding. Only in this way can we improve the precision of the machine, the length of life of the tool and the yield of the tool, and reduce the processing cost. Factors that affect the dosage of grinding are: the choice of machine tool grinding dosage required in the machine tool main drive power, feed transmission power and the scale of spindle speed, feed speed scale. The rigidity of the machine-tool and workpiece system is the important factor in the quantity of grinding. The choice of grinding dosage should make the machine tool - tool-workpiece system not very much vibrate. If the thermal stability of machine tool is good, heat deformation is small, can increase grinding dosage appropriately. Tool cutter material is the important factor that affects the grinding consumption. Table 6-2 is the function of the commonly used tool. The number of tools used for digital control machine tool is used to adopt indexable blade (machine clamp blade) and have certain life span. The material and shape dimensions of the blade must be adjusted to the grinding speed and quantity of the unit in the step. For the parameters of the standard blade, please refer to the manual and product samples. Table 6-2 commonly used function of cutting tool materials than grinding speed cutting tool material abrasion resistance hardness hardness of high speed steel with the temperature minimum worst largest cemented carbide low low differential large porcelain ceramic blade diamond in high