新传真机维修大全2(国外英文资料).docVIP

新传真机维修大全2(国外英文资料) Rational light 621 CIS compensation method: Function 56666 starts from start 59 The all-clear method of brother 275 Function * 2, 8, 6, 4 (2 seconds) 01 Canon B320s light compensation method: Feature 2 START # START Maintenance of the bible panasonic UF - 208 - m fax machine maintenance into the way should be: in turn according to the FUNCTION dialing dial telephone/phone/dial * into phone/dial Personal maintenance summary: The panasonic 8595 fax machine displays the error 026 Treatment: replace a lithium battery on the upper right side of the panel The sharp series shows the black block How to handle it: this is typically caused by the mainboard ROM, and you only need to take the ROM and then turn it on the motherboard Capacitance C5 short circuit discharge and then put on it (note: it is in a direction) The sharp fax machine picks up the receiver without any sound (e.g. 165, 245, 455... / /). How to handle it: these are basically not a fax machine fault, like these older models are all out of line, just change the phone line Light 300 maintenance entry Will 3 and 7 stop button pressed at the same time, then, at this time all machines on the operation panel with flashing will, says it has entered the machine service (maintenance) model, and then press 1 key, the machine will print out a list of the code, (white level is 2, but youll have to put on a white machine in CIS, and dont touch the original sensor!!) Brother 515 fax machine maintenance details Turn on the noise and then solve the problem. The function * 2, 8, 6, 4 shows that the wait will be cleared after the MAINTENANCE Other features are described below Enter the maintenance mode 05 light compensation (not sure) Print head test 10 built-in set (maybe you dont know whats the use of the soft switch, so you should not have to change the Settings at this time, in order to avoid unnecessary trouble. If you are like me like to understand more thoroughly, you might as well the next step.) 11 pr