显示器管改电视的方法(国外英文资料).docVIP

显示器管改电视的方法(国外英文资料) Monitor tube change TV method! Friday feb. 20, 2009 whom display work in multiple frequency, high frequency environment, so the tube deflection coil is multi winding in parallel, each brand and a display circuit design and working frequency, so the different brand display tube, its deflection value and winding structure is inconsistent. Note: multiple lines and winding around, you can see that there is a common law between multiple lines and winding, which is a multi-strand double line and two parallel lines. Two groups of three lines and four lines and two parallel lines. Wait for a few kinds. Modified method The bifilar winding line deflection value generally between 0.6-1.2 euro, some less, and only 1.2 euro, into a series or not, so add a impedance transformer, also can use. Cant use the impedance transformer directly. The answer is yes. Im just going to separate the double lines and the two groups, and theyre going to be in the series of four coils, so theyre going to be 2.4, and theyre completely ready to go, Note: the head and tail of each set of coils are connected, and one group cannot fail, otherwise the X cross image will appear. The resistance is around 1.2 o, and the series can be used. 3 lines and spare if the value is 0.6 euro, all can separate, throw away two groups or a set of series into 2-3 Europe used directly, if 1.2 euro can be directly used in series. Line 4 and rao, like three line and round of restructuring, as long as the resistance to fulfill the requirements of 2-3 o, if all the series resistance is too high, one or two groups can be thrown away if 1.2 euro can be directly used in series. You can do the same thing with multiple strands, but dont mess it up. Field coils can be used in series, and some dont string directly. Check the resistance values in the 12 to 18 Whether it is a deflection or a deflection coil, the connection is connected to the end of the head. All the monitors I use have never used an impedance, an