模具基本知识简介与分析(国外英文资料).docVIP

模具基本知识简介与分析(国外英文资料) Mould: industrial production to injection molding, blow molding, extrusion, die casting or forging molding, smelting, the methods of stamping, stretching products of various molds and tools required. In short, the mold is a tool for molding objects, which are made up of various parts, and different parts are made of different parts. It mainly USES the physical state of the forming material to realize the processing of the physical appearance. The mold can be divided into metal mould and non-metallic mould according to the material that is formed. The metal mould is divided into: casting mould (non-ferrous metal casting, steel casting) and forging die etc. Non-metallic mold is also divided into: plastic mould and inorganic non-metallic mould. And according to the material of the mould itself, the mold can be divided into: sand mold, metal mould, vacuum mold, paraffin mold and so on. With the rapid development of polymer plastics, plastic mould is closely related to peoples life. Plastic mould can be divided into: injection molding mold, extrusion molding mold, gas auxiliary molding mould and so on. General mould category (1) two plate mold is also called the single parting surface model, is one of the most simple in injection mold, it takes the whole mold parting surface for interface divided into two parts: the dynamic model and mode. Part of the cavity is moving, and part of the cavity is set. The mainstream channel is fixed; The shunt channel is open on the parting face, and after the die, the product and the runner remain in the moving mode, and the moving module has the ejector system. (2) three board mould or fine runner mould has two will mold parting surface is divided into three parts, more than two plate gate plate, suitable for the occasion of the sides of the products are not allowed to have a gate mark, this mould into the gate, so is fine runner mold, the mold structure complicated accordingly. Start the power to use the mountain to