现在就发布一下进入工厂模式中常见英文缩写单词的英汉对照(国外英文资料).docVIP

现在就发布一下进入工厂模式中常见英文缩写单词的英汉对照(国外英文资料) The first entry is: Acer (Acer) In the state of shutdown, hold AUTO and MENU at the same time, then press the POWER button to turn on the monitor. At this point, press MENU button to open the OSD MENU will be found that the OSD MENU is not appear in the middle of the screen to the usual, but on the left side of the screen, the upper left corner to appear red F symbol, adjust the cursor to the F with about key symbol, press MENU key. BenQ (BenQ) There is a slight difference in the way in which the normal liquid crystal display and the late LCD display are entered into the factory mode. Early products into the factory model of the method is: in shutdown state, press MENU: and EXIT button at the same time, press the POWER key to open the display. Boot and then press I . Early benq products factory mode very little useful information for ordinary consumers, are some related professional color Settings option. Benq new LCD (such as FP241WZ) into the way of the factory pattern is as follows: first off, press the power button, determine the key and the menu button at the same time, boot after press next to enter. LG In the state of shutdown, hold down the MENU key, then press the POWER button to turn on the monitor, and the OSD MENU will appear in the end with new options. Viewsonic (Viewsonic) When you turn off the power button, press the power button to turn on the display. The indicator is yellow. Then press 1 to open the menu. The F character appears in the lower right corner, moving the cursor over it and pressing 2 to open it. A Factory menu option is added at the end of the entry menu option. Under the viewsonic LCD factory pattern we can learn a very important information, liquid crystal display panel model, it is very helpful to judge the batches of the liquid crystal display. Samsung (Samsung) Samsungs entry into the factory model is more complicated. In the boot state, the first in the OSD menu will be brightness and contrast