碳纳米管用于锂离子电池负极材料(国外英文资料).docVIP

碳纳米管用于锂离子电池负极材料(国外英文资料) PDF documents may have a poor browsing experience at the WAP end. It is recommended that you choose TXT, or download the source file to the native view. Volume 36, 1, 2006, 2 Pool BA T TER Y IMON THL Y B Carbon nanotubes are used for the anode materials for lithium-ion batteries Zhang wanhong 1, fang 1, yue 2, dragon 2, 3 liang min Limited company, guangdong shenzhen 518055; Chengdu institute of organic chemistry, Chinese academy of sciences, chengdu, sichuan, chengdu, sichuan, sichuan, sichuan, sichuan, sichuan, sichuan, sichuan, sichuan, sichuan, sichuan, sichuan, sichuan, sichuan (11 xi an jiaotong university materials science and engineering college, xi an 710049, xi an, shenzhen Abstract: the electrochemical properties of negative electrode materials were tested by using carbon nanotube (CN Ts) as additive to the anode material of lithium ion battery. The results showed that adding 2% (mass ratio) of CN Ts, make the first charge and discharge capacity of anode materials respectively, 2914 mAh/g and 4511 mAh/g, 20 times of circulation, the capacity did not see decay. This is based on CN Ts, which has a larger than surface area and high capacity for lithium storage. Keywords: lithium-ion batteries; Negative material; Carbon nanotubes; Electrochemical performance of Chinese library classification number: TM91219 literature identifier: A article number: 1001-1579 (2006) 01-0050-02 Area and high lit hium intercalation capacity of CN Ts1 [1] plus [2] The cathode materials widely used in the production of lithium-ion batteries are graphite carbon materials Spacing makes it easier for Li embedded, tubular structure will not collapse collapse in repeated charge and discharge process, to improve the battery charge and discharge capacity and cycle stability, the disadvantage is that the first charge and discharge efficiency is low To make CN Ts as the anode material for lithium ion batteries Applications are limited. The material, examined the per