讲解万用表的应用!(国外英文资料).docVIP

讲解万用表的应用!(国外英文资料) Explain the application of multimeter The selection of a pointer table and a digital multimeter: But the process of pointer oscillation is more straightforward, and a pointer is less accurate. The swing speed range can sometimes more objectively reflect the size of the measured (such as TV measurement data bus the slight shaking when sending data (SDL) digital intuitive readings, the process of change but number looks very messy, not easy to watch. A low voltage 1.5 V is a high voltage 9V or 15V and the black pen is the positive end of the red pen. The digital watch USES a 6V or 9V battery. Resistance file: two battery cells in the 2-pointer table. Pointer table pens and output current is relatively much larger Numbers table, can make the speaker sends out the loud in R1 Ω gears da sound, with R10k Ω file can even light emitting diode (LED) The table of pointer is relatively small in relative to the digital table, 3 voltage. The measurement accuracy is worse. Place for some high voltage electric current cannot even measure, because of its resistance to affect the circuit being measured (for example, when measuring the acceleration of the TV picture tube voltage level measurement value is lower than the actual value will be many) the integrity of the digital meter voltage resistance is very big, at least in ohms, little impact on circuit under test. But the high output impedance makes it susceptible to induced voltage, and the data that some electromagnetic interference is stronger can be false In relative terms, the measuring circuit of high current high voltage is applied in the measurement of the gauge. TV sets, stereo. The digital circuit measurement of low voltage small current is applicable to digital meters, such as the BP machine, cell phone, etc. It is not absolutely possible to select a pointer table and a digital table based on the situation. (1) the measuring technique of a pointer. Any pens and connect one end, speakers, headphones, mo