AR205 209维修手册（国外英文资料）.doc

AR205 209维修手册（国外英文资料） One, failure code: C1-00 main charge failure: Phenomenon: MC main charge output opens. Relevant section: the MC component is not installed or installed incorrectly; The high pressure plate is disconnected from the wire; High voltage component damage. Solution: sim8-2 detects MC output; Check the replacement parts. CE - 00 had another communication failure The CE -01 printing service card is damaged or uninstalled CE -02 failed to find the specified mail server or FTP server The server response is specified in the ce-03 image transfer The CE - 04 FTP server account or password is invalid The CE -05 FTP server directory is invalid CE -06 failed to find the specified mail server (POP3) The POP3 server account or password error for the CE -07 input CE - 08 failed to find the specified mail server (POP3) EE - EU automatic imaging agent adjustment failure (too much toner) The results show that the output of the toner sensor is 1.5 V or lower when the automatic development adjustment is performed. EE - EL automatic imaging agent adjustment failure (too little toner) The results show that the output level of the toner sensor is 3.5 V or higher when the automatic development adjustment is performed. E06-11 CIS black and white correction failure (white correction) : The phenomenon indicates that the CIS reference white board reads the electric flat anomaly when the light is on. Related part: the base board is dirty; Failure of the CIS lamp; CIS connection disconnected; CIS component exception; Scanner circuit boards damaged. Solution: sim5-3 checks for CIS exposure; Check the replacement parts. E06-14 CIS communication failure: Explanation: the communication failure (clock synchronization) between the circuit board and the CIS - ASIC. Related: CIS connection; CIS component; Scanning circuit boards; Solution: check for replacement parts. E07-01 system data failure: The phenomenon shows that HDD does not respond in 30 seconds when the HDD system data book