PPPOE(拨号上网)常见故障代码及分析（国外英文资料）.doc

PPPOE(拨号上网)常见故障代码及分析（国外英文资料） PPPOE (dial-up) common failure code and analysis (1) 645 failure description: the dial-up adapter is unloaded For Windows ME and Windows 98, the solution is to add dial-up adapter components to Windows 98. For Windows ME, because it does not directly add the dial-up adapter options, so you must first remove dial-up networking components in the control panel, add the dial-up networking components complete adapter to add. (2) 691/629 failure description: no validation Possible reason is that the user account or password input error, or the users account balance is insufficient, the user exit when use did not properly and cause the user account resides, can wait for a few minutes or restart before dialing. Also, for example, those who buy the Internet in the dormitory, often because the network card is stolen, the card number is being used, and you cant log in. It is recommended that you keep your network card well. (3) 630 failure description: unable to dial, no suitable network card and driver It is possible that the network card is not installed, the network card driver is not normal or the network card is damaged. Check whether the network card is working properly or update the network card driver. (4) 633 failure description: no telephone directory, no dial-up connection This may be a failure to install the PPPOE driver or driver, or the Windows system. It is recommended to remove the installed PPPOE driver, reinstall the PPPOE driver, and check if the network card is working properly. If you still cant solve the problem, you may have a problem with the system, and you will be advised to reinstall the system and then add PPPOE drivers. (5) 720 failure description: PPPOE connection is not supported It is a unique failure of Windows 2000, and it is recommended to re-start the connection again, if you cant troubleshoot it, recommend the reloading system. (6) 697 failure description: the network card is disabled Simply restart the network