STM32F单纯的TIM2定时器溢出中断试验程序（国外英文资料）.doc

STM32F单纯的TIM2定时器溢出中断试验程序（国外英文资料） The STM32F timer has a lot of functionality, so its probably not enough for a simple TIM2 timer, like me Find the example data also can not find the cost of 9 niu 2 of effort finally make up, post to celebrate! I used the ST version here The STM32F FWLIB2.0 library, which is used, adds Chinese comments. The IAR compiled project doesnt come up, and the friends who want to see leave EMAIL and I send you an EMAIL. / * Includes -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- - * / # include stm32f10x_li.h ErrorStatus HSEStartUpStatus; Void RCC_Configuration (void); Void GPIO_Configuration (void); Void NVIC_Configuration (void); Void TIM_Configuration (void); Void delay (void); / * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * Function Name: main * Description: Main program * Input: None * Output: None * Return: None * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * / Int main (void) { # ifdef DEBUG The debug (); / * initializing peripheral device pointer * / # endif GPIO_Configuration (); / / initialize the IO port NVIC_Configuration (); / / initialization interrupt nesting RCC_Configuration (); / / initialize the clock and reset TIM_Configuration (); / / initialize the timer While (1) { Delay (); } } / * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * Function Name: RCC_Configuration * Description: Configures the different system clocks. * Input: None * Output: None * Return: None * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *