TCL王牌 进工厂模式（国外英文资料）.doc

TCL王牌 进工厂模式（国外英文资料） [data sharing] bus enters 2910G, 2910DZ, 2911,2911 D, 2911DI, 2911Z, 2911Z, 2911DZ, 2915DZ, 2915DZ, 2916D, 296d, 296d, 295d, 2975,2975 D, 2975,2975 D, 2980G, 2980G, 2980G, 2980DB, 298d, 2988D, 2988D, 2988DB, 2988DB, 2988DB, 2988DB, 2988DB, 2988DB, 2988DB, 2988DB, 2988DB, 2988DB, 2988DB, 2988DB, 2988DB, 2988DB, 2988DB, 2988DB, 2988DB, 2988DB, 2988DB, 2988DB, 2988DB, 2988DB, 2988DB, 2988DB, 2988DB, 2988DB, 2988DB, 2988DB, 2988DB, 2988DB, 29 AT2911DZ, AT2915DZ, AT2915, AT2927I, AT2927I, AT2939, AT2956, AT2956, AT2956B, AT2956B, AT2975D, AT2975Z, at29775f, at29775f, AT2975F, AT2980D, AT2980DB, AT2988DB, AT2988DB, AT2988D, AT2988D, AT2988D, at298d, at298d, AT2986Z, at29,990, at298d, AT2986Z, at29,990, at298d, AT2986Z, at29,990, at298d, AT2986Z, at29,990, at298d, at298d, at29,990, at298d, at29,990, at298d, at298 The CPU model: OM8838 TDA8841 Parameters: the ordinary remote control to open the back cover D04 location on the circuit board with diode (IN4148), direction same as the direction of the plate, then press menu twice, can be changed into the factory pattern of the project (note: 21 inches according to beautify the picture button). Note: philips IIC digital 29 inch machine core Number: 133 Brand: TCL Type: N14K6, 21A1, 21V1, 21G6, 21V8, 21B1, 21B1, 21B2, N21K1, N21K2, N21K3, N21B1L, N21B2, N21B6, N21B6, N21B6, N21B6, N21B6, N21B6, N21B6, N21B6, N21B6, N21B6, N21B6, N21B6, N21B6, N21B6, N21B6, N21B6, N21B6, N21B6, N21B6, N21B6 The CPU model: TMPA8803 TMPA8809 Boot parameters: A, then press host ▼ volume button, the volume down to 0 (dont let go), press the 0 button on the remote control at the same time, three times must be finished in 1.5 seconds, can enter the factory menu. B, press the look back button on the factory remote. Request: after method A enters factory d-mode, small screen series press 3 digital key to select and set DMODE item 01; The large screen series press the 6 number key and set FACT to open. You can then use the look back but