主板诊断卡使用手册上的代码说明（国外英文资料）.doc

主板诊断卡使用手册上的代码说明（国外英文资料） Motherboard diagnostic card code manual, and the results show that, for the average person is gobbledygook, my hobbies, DIY, motherboard diagnostic card code that is for the whole dont understand. I love to help my friends repair the computer, so I collect a lot of old motherboards and bad boards. We also collected a lot of maintenance data from books and online, and Shared it with friends who love DIY. Part of the codes maintenance direction C1, C3, C5, C6, B0, A7, A8, A8, AF, D1, D3, DE, D4, D9, D9, AD -90 (after the code runs to AD, the code goes to 90 and then automatically shuts down) This type of code is usually maintained in memory. 2.0 B, 27, 2 a, 31, 41 This type of code is maintained by a graphics card. 3.25 This code is divided into two scenarios: no AGP graphics card runs 25, and the equipment on board, such as 1394, the working voltage and the working frequency of the network chip, sound chip, and the working frequency are normal. If the AGP is not in the normal running code, the AGP is run 25, the normal northern bridge is broken. But there are also a few 25 codes due to the failure of the CPU socket or the BIOS data. 4. C0, CF, This type of code is generally not working for the CPU, usually due to the failure of the CPU socket or the BIOS data, and some of the south bridge is bad. 5. The DD Check PCI bus, BIOS data, I/O time clock chip. If this code appears in the occurrence of the for the Intel 82801 db and 82801 exabytes of motherboard, most of the for the occurrence of the worst, can by measuring the signal on the USB interface for judging whether open and sprint. C1-06-0d-41, d3-d6 - EC - ED Both of these codes are typical BIOS data errors or BIOS circuit failures, which can be solved by repainting the BIOS data and checking the BIOS circuitry to work properly. 7.05, 06-c1 cyclic jump, C1-07 loop jumps, D8 Typically, keyboard initialization error, check the condition of the keyboard, replace I/O, and re-write the BIOS. 8.26