光盘刻录的六大要素（国外英文资料）.doc

光盘刻录的六大要素（国外英文资料） Face now is at present larger and larger amount of data, as the price of the CD burner and cd-r fell, many people have purchased burners, use it to burn, save the data, greatly convenient for data storage. There have also been a number of recorded software, such as the WinOnCD, Direct CD... It is. However, the cd-rom is not a simple thing to do, it will be broken, and every user who has a CD will have it. Now with ACER benq burners, burn software for WinOnCD Power Edition localization version 3.6, using the lessons learned in the process of release, let everybody to master skills of burn as many as possible, reduce the meaningless sacrifice of cd-r. Close energy management The average burn CD is longer, and if you set up energy management, it may cause the computer to stop responding for a long time, resulting in the disk failure. So the first thing to do is to shut down energy Management and close energy Management in two ways: one is to set the Power Saving in Power Management in CMOS to NONE; 2 it is to enter the Windows control panel, double-click the icon power management, the system wait state, closed monitor and closed disk from the drop-down list, select all the content of the never, click ok button to return. And save it as a cd-rom-burn scheme. Do not perform other Windows software on the disc Installation CD writer try not to install computer software too much, otherwise it may cause software conflict, cause the failure of the burn, more cant at the time of a disc to perform other Windows software. Use low speed burn CDS Now generally burners are basically support more than 4 times the speed of carving the CD, but I strongly suggest you use 2 times the speed of a disc, because using a disc 2 or 4 times speed can greatly reduce disc process interruption. Method is: in WinOnCD CD window, click the output TAB, in the speed drop-down list, select 2 x or 4 x, then please click burn button. Test and write first Although now most of the burners