数控G M代码（国外英文资料）.doc

数控G M代码（国外英文资料） Give you something important! 1, G00 and G01 The G00 movement trajectory has a line and a line of line, which is only used for point-fixing, and cannot be used for cutting machining G01 is normally used for cutting processing by specifying the target points specified in the direct motion of the movement to the command 2, G02 and G03 G02: clockwise arc interpolation G03: counterclockwise arc interpolation G04 (delay or pause) It is used for forward and reverse switching, processing blind hole, step hole, cutting slot G17, G18, G19 flat select instruction, specify flat processing, commonly used in milling and processing centers G17: the x-y plane, either omitting or parallel to the x-y plane G18: the x-z plane or parallel plane, the x-z plane in the CNC lathe, not specified G19: the y-z plane or the plane parallel to it G27, G28, G29 reference point instructions G27: return reference points, check, confirm reference points G28: automatic return reference points (through intermediate points) G29: return from the reference point and use with the G28 G40, G41, G42 radius compensation G40: cancelling tool radius compensation Give that much, and then give it back in the evening G43, G44, G49 length compensation G43: length is compensated G44: length negative G49: cancelling tool length compensation 8 and G32, G92, G76 transfering G32: threaded cutting G92: threaded cutting fixed cycle G76: threaded cutting complex cycle Lathe processing: G70, G71, 72, G73 G71: the shaft is used for the complex cycle instruction G70: precision machining complex loop G72: face turning, radial roughing cycle G73: a copy of the rough truck cycle Milling machine, processing center: G73: high speed deep hole pecking G83: deep hole pecking G81: drilling cycle G82: deep hole drilling cycle G74: left hand thread processing G84: right hand thread processing G76: fine boring loop G86: boring process cycle G85: reaming G80: cancel the loop instructions Programming style G90, G91 G90: a