Cimatron IT外部指令-起动参数（国外英文资料）.doc

Cimatron IT外部指令-起动参数（国外英文资料） Custom keyboard shortcuts Modify c: \ cimit12 \ dat \ keysdef.dat file , one-key, 61, function KEY definitions 1, POINT, POINT, 1, POINT, 0 7, PLACE, PLACE, 0, put, 0 Among them: How many custom keyboard shortcuts are available in the statistics of the 61 function command keypad POINT function command The command shown in POINT English The function command has a submenu, 1 for, 0 for no Order in Chinese The 0 executes the function command, 1 executes the first command of the function command, 2 performs the second command in the second function command, and so on. How to read the NC program? The anti-reading NC program can only run this function in the NC environment, and the suffix name for an anti-read file can only be.gcod. The details are as follows: In the process mode of the NC environment, it is activated through the CREATE - MILL_USR or USER - NC gcod2tp. TRACE OFF/ON Read the trace, ON to enable, and the system will read the NC program intermittently; OFF to turn OFF, the system will be read at once. SKIP the ON/OFF In the execution of the program, the processing mode of the symbol /, ON is execution, OFF is skipped. A DECIMAL POINT Read the accuracy of the NC program data. The low version opens the high version of the file, and in the shortcut the parameter - ive will allow the low version to open up the high version of the file (only version 11 is available.) The knife track after 12 The number keys: 1 point (point) 2 line (line) Circle (circle, arc) Four corners 5 trim (curve pruning) 6 group (group) 7 place (explosion) 9 extract The letters: Small states: B blank (hidden) C comcrv (composite curve) D delete (delete) E exit F file Layer (layer) M move O offset P project R user (external command) S sweep T plot (print) U ucs (coordinates) V verify (verify) W window (window) Y display (display) Z tpath (dao road management) Capital: B blank minus blank C comcrv minus create D the delete E exit - - close F file - - save L