fastboot的使用帮助（国外英文资料）.docVIP

fastboot的使用帮助（国外英文资料） Fastboot usage: Fastboot [ option ] command Explanation: [] in parentheses, this is optional. , which means that this is necessary. Available commands: Update file name from the official update.zip upgrade system. The update.zip must be official Flashall flash boot + flash system Flash partition name / name will file is written to partition. The format of the file must be correct. Partition name, but not limited to the system, recovery, boot, splash1, hboot, radio, userdata, cache Erase partition name to empty a partition. Getvar the parameter name shows a start parameter The boot kernel file [] downloads the kernel from the computer to the phone and starts the system with the kernel. Flash: raw boot kernel file [] create the boot.img and download it to the phone boot system. Devices lists all devices connected to computers. Reboot normal boot system Reboot - bootloader boot system to hboot Options: -w empty the user data partition and cache partition. The wipe data/factoryreset in recvery The serial number of the device to be operated by the serial number -p product name specifies the product name of the device to operate. -c command line to replace the systems startup command line with the command line. Partition interpretation: System: system partition. We usually brush this partition. Userdata: data partitioning. Cache: cache partitions Recovery: recovery partition. Boot: partition the kernel and ramdisk. Hboot: this is the partition of SPL. Its important. Its also the partition of fastboot. Splash1: this is the first screen. Radio: this is the area where the wireless is located. Adb devices looks at the connected device Adb reboo-bootloader allows the phone to enter the fastboot mode Fastboot devices can see the list of devices Use the following command to burn the boot, systerm, and userdata Fastboot flash boot path \ boot img Fastboot flash system path \ system. Img Fastboot flash userdata path \ userdata.img Then