ftp常用命令介绍（国外英文资料）.docVIP

ftp常用命令介绍（国外英文资料） File transfer (solaris) between the FTP local workstation and the remote workstation (solaris) : You must have a remote workstation account and password to do the transfer: Format: FTP hostname or FTP ip_address Such as: FTP 129.123.45 and remote workstation 129.123.45 for file transfer Name (5: user-name) : enter the account Password (5: user-name) : enter the Password ! The command to execute an external operating system. FTP help lists FTP file transfers, any commands you can use. FTP ! Ls lists local workstations, all file names under directory. FTP ! PWD lists the local workstation, where the work directory is currently located. FTP ls lists all the file names in the remote workstation directory. FTP dir lists all the file names in the remote workstation directory (slightly the same as the ls-l instructions for UNIX). FTP PWD lists the directory location where the remote workstation is currently located. FTP CD dir1 changes the working directory location of the remote workstation to dir1. FTP get file1 copies files from the remote workstation to the local workstation. FTP put file2 copies the file from the local workstation to the remote workstation. FTP mget *.c on the remote workstation, all files with the filename suffix c are copied to the local workstation. FTP mput *.txt for the local workstation, file name suffix TXT file, copy to remote workstation. FTP bin transports the file in binary mode, and remember to execute this command when delivering executable files. Can be sending ASCII files according to the binary mode, but must not to transmit binary files in ASCII mode, otherwise the contents of a binary file will be damaged and cannot be used. FTP asc transmits files in ASCII mode, only when transferring ASCII files, especially between DOS and Solaris. FTP prompt USES mput/mget without having to ask yes/no for every file FTP quit. FTP bye ends FTP work, just like quit. Note: file transfer from PC to workstation can also