不知道你是否曾碰到过bios里面能够检测到硬盘（国外英文资料）.docVIP

不知道你是否曾碰到过bios里面能够检测到硬盘（国外英文资料） As readers may know, the SCSI interface is an unattainable place in the world in terms of computer peripherals, especially storage devices. This is not just about the advanced technology and performance it has, but also the significant price it holds. The meaning of SCSI is the SmallComputerSystemInterface, which was first developed in the late 1970s. After a lot of development, todays SCSI is divided into SCSI -1 and SCSI -2, and the latest SCSI -3 types. The most popular version, however, is scsi-2. The type of SCSI 1. The SCSI - 1 The SCSI -1 is the most primitive version, with a frequency of 3MB/S when asynchronously transmitted, and the frequency of synchronous transmission is 5MB/S. Although it is now almost obsolete, it will be used in some scanners and internal ZIP drives, with a 25-pin interface. In other words, if the SCSI -1 device is connected to your SCSI card, you must have an internal 250-pin interface cable; When using an external device, you cannot use any of the internal interfaces (that is, the internal interfaces are not available at this time). 2. The SCSI - 2 Early SCSI - 2, called FastSCSI, by improving the synchronous transmission frequency of the data transmission rate is increased from the original 5 MB/s 10 MB/s, support 8 bit parallel data transmission, can even seven peripherals. Succeeding WideSCSI, supporting the 16 bit parallel data transmission, data transfer rate also increased to 20 MB/s, can even 16 peripherals. This version of SCSI USES an interface of 50 pins, mainly for scanners, cd-rom drives, and older hard drives. 3. The SCSI - 3 In 1995, the more rapid SCSI -3, called UltraSCSI, also reached 20MB/s. It increases the clock frequency to 20MB/s, improving the data transfer rate. When using the 16-bit Wide mode, the data transfer rate can be increased to 40MB/s. This version of SCSI USES a 68 pin interface, mainly on the hard drive. The typical feature of scsi-3 is to increase the bus frequency