手机存储（国外英文资料）.doc

手机存储（国外英文资料） The CMOS is a special RAM chip on the computer host board, where the system parameters are stored, and the system setup program in the BIOS is the means to complete the parameter Settings. CMOS memory is used to store the BIOS Settings to save the data, including some of the systems hardware configuration and user for some parameter Settings, such as the system of traditional BIOS password and equipment startup sequence, and so on. CMOS is a read-write RAM chip on the motherboard, used to save the current systems hardware configuration and user of parameter setting, its content can be setup to read and write. The motherboard BIOS is a set of curing to the computer in a ROM chip program, it holds the computer is the most important basic input and output of the program, system Settings information, after startup self-check and the initiator of the systems. Its main function is to provide the lowest, most direct hardware setup and control for the computer. BIOS set is a set of hardware of computer program that is kept in block a EPROM or EEPROM chip on the motherboard, containing important information system and set the system parameter Setup, the BIOS Setup program. The BIOS setup is stored in the BIOS chip, and the BIOS chip is a rectangular or square core on the motherboard Picking out a button cell can restore the BIOS to the factory default The film is set only when it is turned on. (typically, press F2 or Delete into the BIOS Settings when the computer is booted. Some special models are based on F1, Esc, F12, etc.) The CMOS chip has only the ability to save data, and the modifications to the parameters in the CMOS are implemented using the BIOS setup program. CMOS is mainly used to store the parameters set the BIOS setup with the data, and the BIOS setup is mainly the basic input output system of computer management and setting up, make the system run in the best state, use the BIOS setup program can also eliminate system failure or diagnosis system