浅谈循环流化床锅炉返料易出现的问题（国外英文资料）.docVIP

浅谈循环流化床锅炉返料易出现的问题（国外英文资料） Circulating fluidized bed combustion as a new kind of clean and efficient combustion mode, is the most basic characteristics of solid particles in the combustion chamber, separation mechanism and the loopback device composed of solid particle recycling and combustion in the loop. Solid materials the loopback device is the key part of circulating fluidized bed boiler, directly affects the safe and stable operation of the boiler, return to the normal work of the feeder is the key to implement material circulation, so how much the amount of circulating ash to determine the ability of boiler load. Once the reflector is running abnormal, it will affect the safe operation of the boiler economy. Automatic input of first-grade return material of xinle circular fluidized bed boiler, the secondary returns are based on the boiler load and the temperature of the bed. Two, the problem that is easy to come out of running: 1, the cyclone gathers dust Cyclone tube ash is due to the circulating ash amount multiplied, not stable through the cyclone cylinder bell mouth place, in the bypass accumulate, inspect dish found furnace when the differential disappears, but put down a little bit grey, grey tube (not actually put down, is just to save the ash of the ash tube causing an illusion) is 100% at this time the bell mouth get grey cyclone cylinder. When it is found that the cyclone can not fit in, the furnace must be pressed immediately, otherwise the return machine will be coking and the accident will be expanded. Cyclone tube together reasons of grey: a no regular circulating ash, blindly raise the furnace pressure difference, circulating ash content increased in the loop, in case of special circumstances reaching the limit of cyclone returns bearing. B coal is low in quality, and the ashes are likely to cause the cyclone to get gray. The material is too thin or short coal, the adjustment is not in time, a large quantity of wind is large, the penetration ab