打印机器里有那些部件（国外英文资料）.docVIP

打印机器里有那些部件（国外英文资料） There are those parts in the printing machine Reward points: 0-resolution time: 2006-1-22 19:30 Questioner: szeszxwwy level - the best answer we only know Laser printers print speed and print quality is good but we dont know, usually the Laser printer can be divided into six systems, Power supply System (Power systems), DC control System (DCS controller System), the interface System (Formatter System), Laser scanning System (Laser/Scanner System), the imaging System (Image Formation System), and rub the paper System (Pick - up/Feed System), one of the most important is the imaging System, here we respectively explained to six System: Power System On todays age of electricity, it seems that all machines need to use electricity, therefore each machine there must be a power supply system (just a weight size), more no exception for electricity more pay attention to the laser printer. The power supply system of the laser printer is the energy base of the other five systems, and its performance is directly affected by the other five systems. In general, the power supply system for the laser printer is divided into three kinds, respectively is high voltage, low voltage, dc, high voltage general function and imaging system, using high voltage can make the laser work operation. The low pressure is mainly used to drive each engine motor, and the voltage size can be determined according to the need, such as the famous HP 6L series, which is 5V and 12V. Direct current is used to drive sensors, control chips, and CPU on DC boards. The three types of voltage are isolated from each other, each of which is the main, but they also influence each other to create a stable power supply system. DC control System (DC) Dc control system is mainly used to coordinate and control the printer work between various systems, such as data receiving, the scanning unit control, sensors, test, and monitoring of all kinds of direct current (dc) and distribution, etc., its circuit