船舶主机评估考试(运行管理)（国外英文资料）.docVIP

船舶主机评估考试(运行管理)（国外英文资料） Cabin floor inspection 1) piston cooling reflux and crankcase work 5 minutes 2) thrust bearing, intermediate bearing stern shaft seal 7 3) cooling water pump, oil pump, circulating water tank, slide tank 8 Middle class tour inspection 1) the camshaft, oiler b) scavenging box, five points of the cooler 3) fuel tank and air bottle 5 Engine room inspection 1) cylinder cover and supercharger 7 2) high pressure oil pump, exhaust valve, expansion tank 8 Total score of 50 Five minutes for every one minute When the ship set sail after constant speed navigation bridge telephone notice or telegraph repeat shakes twice Full Ahead, should be light and heavy diesel conversion operations, at the same time to switch from the bottom valve operation. Tours of inspection: The following inspection should be performed when the main engine is on a fixed speed: Check in the liquid level Check the water level of the expansion tank and notice the change in the water tank and the oil stain Appear; Check cylinder cooling water (oil), fuel injector, piston cooling water tank liquid level, low should be the complement, and through the water according to the condition of inverter to observe their return is normal. Check the fuel oil level of the fuel oil service tank. To inspect the oil level of the fuel settling tank, and to start the refuelling oil pump when it is insufficient. Check the oil level of the lubricating oil circulating tank. When the oil is low, the oil should be filled in time. If the oil position is abnormal or decrease, the reason should be found in time. Check the oil position in the governors part and make up to the specified oil level in time. Check the supercharger oil level and fill the oil when it is insufficient. Oil level inspection of rocker oil. Oil level check for hydraulic valve actuator, which should be made up to the specified oil level when insufficient. The oil level of the cylinder lubricator is inspected, the oil level is up to the spe