远程桌面连接命令和一些常用的cmd命令（国外英文资料）.docVIP

远程桌面连接命令和一些常用的cmd命令（国外英文资料） Remote desktop connection commands and some commonly used CMD commands Remote desktop connection command MSTSC/v: 192.168.1.25/console? : / : Tj Bh: F fairly Rk CMD runs command # k. 2a Delete the file rd filename/S q_gK 0 Create file MD file name rP _M (\ 1.net user admin godmour/add builds a new user called the admin password for godmour by default for user group member] 9 .net user admin/del deletes the user named admin 3.net user admin/active: no will disable user admin 4.net user admin/active: yes will enable user admin activation =}! Q. % 9 5. Net user admin to check the support of the admin user ^ Lod Net localgroup administratros admin/add promotes user rights z! The X6 m \ * 7.net view \ \ IP view remote host Shared resource bHS (DJy) IP 8. Net use x: \ \ \ sharename remote alluding to the site operators Z (connect net use IP \ \ \ the IPC $/ user password : name) B77dl / | F 9.net user admin godmour changed the password for admin to godmour rG + 10.net start servername starts the Telnet service y0s d =.o Net start servername stops Telnet service YHb) 3 # / Run the input CMD enter the | bM0gg at the command prompt For % windir % \ system32 \ *.dll Restore system = {.p 3v8 Tracert 61.144.56.101 checks whether the routing is working properly The netstat command t * vb ^ ^ (O Netstat [-s] [-s] [-a]. * - ou / dR Of course, you can also use netstat /? Command to view the format of the command and the detailed parameter description / $ZE The netstat parameter means Sb - r shows the content of the native routing table 5 yb ^ | x -s shows the usage status of each protocol (including the TCP protocol, UDP protocol, IP protocol) - n displays the address and port ~ xh /! 6 w2f -a shows the port number of all hosts. Running the Netstat -a command shows all the connections between the computer and the external connection, the computer port and the external connection; The Netstat ` QNNZ]; : # The -s command displays statistics on the com