马兰士C150说明书（国外英文资料）.docVIP

马兰士C150说明书（国外英文资料） Change the CALL frequency: Press the V/M/ENT key to convert the machine to the dial-up frequency input state. Press the FUNC, press the V/M/ENT button, and the M is displayed. 3 press the CALL key, the speaker makes du, set up. Second, frequency scanning: 1 in dial-up frequency state, press the SC/M ` key, performs a 1 MHZ to scan. At 1MHZ scanning, press the 6 / f./ SS, which will be converted to full frequency scanning, and then the 6 / F.L/SS keys will be converted to 1MHZ. The scanning speed is accelerated when the next 8 / S key or the 9 / S key exceeds 0.5 S. Three, two channels listen: In this function, the screen displays DUAL. 2 in the dial-up frequency state, hold the FUNC key, press 1 / double key, display DUAL, enter DUAL channel watch. Remove the two channels and repeat the above operation. Battery power: 1 in the listening state, this feature stops the receiver from working every 1S, reducing the battery consumption to the usual 1/3. The action button is FUNC + 5 / SAVE. Lockfrequency: FUNC + 1 / SET. Automatic power failure: 1FUNC + 0 / SET, display M. Press 5 / SAVE, display APO, enter automatic power failure. Remove automatic power failure and repeat the above operation. C150 / C450 radio potential development Xue Dianjie Marantz Japanese company producing C150 pocket radio, with its compact, fully functional and was warmly welcomed by the using department, it is also one of the 140 MHZ band spare communication optimization model. C150 station itself, however, is not covered in the instructions for there are many potential function, which introduces with examples below several very practical development method of potential function. Fast programming Preprogramming the frequency (1) while holding down the FUNC key, hit the o button to display the M symbol in the upper left corner of the LCD panel. (2) hit the 8 button alone, and the M symbol in the upper left corner of the LCD panel disappears. (3) while holding down the FUNC key,